notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 1 of 4 product overview the ZX60-H122+ (rohs compliant) uses mini-circuits' high dynamic mmic technology and optimization circuits to pro - vide industry leading linearity over a focused frequency range. housed in a rugged, cost effective unibody chassis, this amplifer supports a wide variety of applications requiring moderate power output, low distortion and 50 ohm matched input/output ports. the big deal ? industry leading high ip3, 46 dbm typ. ? output power at 1 db compression, +23 dbm ? wideband, 500 to 1200 mhz case style: gc957 wideband amplifer ultra high ip3 ZX60-H122+ 50 ? 500 to 1200 mhz key features feature advantages extreme high ip3 vs. current 46.2 dbm typical at 900 mhz versus dc power consumption of 145ma the ZX60-H122+ offers industry leading ip3 performance relative to power consumption. the combination of the design and e-phemt provides enchanced linearity as evidence in the ip3. this feature makes this ampli - fer ideal for use in: ? driver amplifers for complex waveform upconverter paths ? drivers in linearized transmit systems ? secondary amplifers in ultra high dynamic range receivers optimized frequency range covering primary wireless communication bands: cellular and lte low noise figure, 2.5 db typ. a unique feature of the ZX60-H122+ is the combination of low noise fgure performance with the high dynamic range, differentiating this amplifer from the competition. unconditionally stable capable to operate to a wide range of source and load impedances. very small size, 0.75" x 0.75" the unique unibody size and construction enable the ZX60-H122+ to be used in extremely compact connec - torized applications.
notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 2 of 4 wideband amplifer ultra high ip3 ZX60-H122+ features ? ultra high ip3, +46.2 dbm typ. at 0.9 ghz ? gain, 14.9 db typ. at 0.9 ghz ? high pout, p1db, +22.8 dbm typ. at 0.9 ghz ? low noise fgure, 2.5 db typ. at 0.9 ghz applications ? lte ? buffer amplifer ? test equipment ? high dynamic range lab driver amps electrical specifcations at 25c and 5.5v unless noted 50 ? 500 to 1200 mhz case style: gc957 connectors model sma ZX60-H122-s+ rev. a m152326 ed-14675 ZX60-H122+ cw/th/cp 150811 parameter condition (ghz) min. typ. max. units frequency range 0.5 1.2 ghz gain 0.5 15.6 db 0.7 15.3 0.9 13.4 14.9 16.4 1.2 14.2 input return loss 0.5 18.4 db 0.7 16.9 0.9 14.4 1.2 11.2 output return loss 0.5 16.6 db 0.7 13.6 0.9 11.4 1.2 8.9 output ip3 0.5 41.9 dbm 0.7 45.2 0.9 41.0 46.2 1.2 40.6 output power @ 1 db compression 0.5 22.3 dbm 0.7 22.4 0.9 22.8 1.2 23.0 noise figure 0.5 2.3 0.7 2.4 0.9 2.5 1.2 2.5 db directivity (isolation-gain) 0.5 - 1.2 6 db dc voltage 5.5 7.0 v dc current 110 145 180 ma +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 3 of 4 ZX60-H122+ maximum ratings parameter ratings operating temperature -40c to 85c case storage temperature -55c to 100c dc voltage 7 v input rf power (no damage) 24 dbm power consumption 1.25 w permanent damage may occur if any of these limits are exceeded. outline dimensions ( ) inch mm outline drawing a bcd e fgh j k l m n p q r wt .74 .75 .46 1.18 .04 .17 .45 .59 .33 .21 .22 .18 1.00 .37 .18 .106 grams 18.80 19.05 11.68 29.97 1.02 4.32 11.43 14.99 8.38 5.33 5.59 4.57 25.40 9.40 4.57 2.69 23.0 note: when soldering the dc connections, caution must be used to avoid overheating the dc terminal. see application note. an-40-010 . !
notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 4 of 4 ZX60-H122+ typical performance data/curves ZX60-H122+ gain 5 10 15 20 25 500 600 700 800 900 1000 1100 1200 frequency (mhz) gain (db) ZX60-H122+ directivity 0 5 10 15 500 600 700 800 900 1000 1100 1200 frequency (mhz) directivity (db) ZX60-H122+ output power at 1-db compression 10 15 20 25 30 500 600 700 800 900 1000 1100 1200 frequency (mhz) output power (dbm) ZX60-H122+ noise figure 0 1 2 3 4 500 600 700 800 900 1000 1100 1200 frequency (mhz) noise figure (db) ZX60-H122+ vswr 1.0 1.5 2.0 2.5 3.0 500 600 700 800 900 1000 1100 1200 frequency (mhz) vswr in out ZX60-H122+ ip3 20 25 30 35 40 45 50 500 600 700 800 900 1000 1100 1200 frequency (mhz) ip3 (dbm) frequency (mhz) gain (db) directivity (db) vswr (:1) pout at 1db compr. (dbm) noise figure (db) output ip3 (dbm) in out 500.00 15.58 5.44 1.21 1.34 22.3 2.3 41.9 550.00 15.53 5.45 1.22 1.37 22.0 2.3 41.3 600.00 15.46 5.53 1.23 1.41 22.1 2.4 42.2 650.00 15.39 5.64 1.25 1.46 22.4 2.4 44.2 700.00 15.31 5.74 1.28 1.50 22.4 2.4 45.2 725.00 15.26 5.82 1.29 1.52 22.6 2.4 46.1 750.00 15.20 5.89 1.31 1.54 22.7 2.4 46.5 800.00 15.09 6.03 1.34 1.58 22.8 2.4 46.7 850.00 14.99 6.16 1.38 1.63 22.8 2.5 46.7 900.00 14.91 6.22 1.42 1.68 22.8 2.5 46.2 950.00 14.83 6.31 1.45 1.74 23.2 2.5 42.7 1000.00 14.72 6.43 1.49 1.80 23.3 2.5 41.4 1050.00 14.62 6.54 1.53 1.86 23.3 2.5 42.4 1100.00 14.49 6.70 1.58 1.92 23.3 2.5 41.6 1150.00 14.36 6.85 1.63 1.98 23.1 2.5 40.3 1200.00 14.22 7.02 1.68 2.06 23.0 2.5 40.6
|
